Everything you need to know about water-saving taps — idealista/news

Water represents a fundamental resource for human life and for the planet’s ecosystem. In this context, the adoption of water saving taps It is an effective strategy to significantly reduce water consumption within homes. These devices, characterized by innovative technologies, allow the flow of water to be limited without compromising efficiency and functionality.

Water-saving taps: what they are

THE taps water and energy saving devices are designed to reduce water and energy consumption during dispensing.

Their operation is based on two fundamental principles:

  • rwater flow reduction: through aerators or flow control mechanisms, the quantity of water supplied is limited without compromising functionality or ease of use;
  • mwater-air mixing: the aeration of the water creates a voluminous and full-bodied jet, increasing the sensation of abundance while using a smaller quantity of water.

As already highlighted, water-saving taps not only offer concrete advantages in terms of water consumption but also stand out for their attractive design and modern.

Furthermore, replacing traditional taps with water-saving models is a simple and quick operation, which does not require any particular plumbing work.

In addition, the wide variety of designs available on the market allows you to choose the solution that best suits the decor and style of your bathroom. However, the initial price of the water-saving faucet can vary considerably based on different features:

  • low (€20-100): essential taps with basic functionality and simpler designs;
  • medium (€100-250): wide range of models, with a good balance between functionality, aesthetics and price;
  • high (over €250): high-end taps, with refined designs, fine materials and innovative technologies.

Purchasing a water-saving tap represents an important investment, not only in terms of water saving, but also design and functionality. For this reason, it is essential to rely on the advice of an expert who can indicate the model best suited to your needs.

What to put on the tap to save water?

In the field of water-saving taps, the mixer and the flux regulator they play a fundamental role in reducing water consumption without compromising efficiency and pleasantness of use. The thermostatic mixer allows you to precisely set the desired water temperature, avoiding dispensing too much hot water and ensuring optimal comfort.

The flux regulator, usually integrated into new taps, allows you to limit the quantity of water dispensed without compromising the pressure or practicality of the jet. In addition, the jet aerator, a mechanical device applicable to the tap mouth, mixes water and air inside the jet, reducing its volume by up to 50% without affecting its pressure and the sensation of abundance.

The installation of flow regulators, even on pre-existing taps, offers numerous benefits:

  • reduction in water consumption: the adoption of responsible water consumption practices has a positive impact on the environment and its domestic management;
  • lower costs on the bill: saving water consequently leads to a reduction in domestic utilities;
  • functionality and comfort: modern flow regulators guarantee a fluid and controlled jet of water, making use of the tap more pleasant and practical.

The choice of thermostatic mixers and the installation of flow regulators represent a significant step towards more responsible and conscious water consumption.

What does water-saving sanitary ware mean?

In a context of growing environmental awareness, the water saving it no longer represents a simple individual choice but a pressing need. The protection of this precious and not infinite resource requires the adoption of eco-sustainable behaviors and responsible on everyone’s part. Adopting simple measures in daily life can make the difference in terms of water saving:

  • turn off the tap during daily activities: avoid letting the water run unnecessarily during personal hygiene, such as brushing your teeth, shaving or soaping your hair;
  • use washing machine and dishwasher with full load: operate these appliances only when fully charged to optimize water consumption;
  • recycle air conditioner water: collect the water produced by the air conditioner to use it for watering plants or for other non-potable domestic purposes;
  • replace old faucets with water-saving models: opt for taps equipped with technologies that reduce the flow of water without compromising functionality.
  • Repair leaky faucets promptly: intervene promptly on any leaks to avoid unnecessary waste.

In addition to simple daily behaviors, the adoption of specific technological solutions can significantly contribute to saving water:

  • install water-saving mixers: these devices reduce the flow of water while maintaining an effective and comfortable jet;
  • adopt a differential toilet flush: this system allows you to choose between two flush quantities, reducing water consumption when possible.

It is also worth underlining that the adoption of water-saving taps leads to a significant decrease in water consumption, going from a flow rate of 12 liters per minute supplied by a traditional tap to just 5 liters supplied by a saving model.

 
For Latest Updates Follow us on Google News
 

NEXT Martina Dall’Ara’s docufilm awarded